Working procedure
When the threading machine is working, first put the pipe to be threaded into the pipe chuck, impact and clamp it tightly, press the start switch, and the pipe will rotate with the chuck, adjust the size of the die opening on the die head, and set the length of the thread opening Then pull the feed hand wheel clockwise to make the die cutter on the die head stick to the end of the rotating pipe with constant force, and the die cutter will automatically cut the threading. At the same time, the cooling system will automatically spray oil for the die cutter to cool. When the wire mouth is processed to the preset length, the die cutter will automatically open and the wire mouth processing is completed Turn off the power, knock open the chuck and take out the pipe
The threading machine also has the function of pipe cutting: put the pipe into the pipe chuck, impact and clamp it, start the switch, put down the cutter holder on the feed device, pull the feed hand wheel, make the blade on the cutter holder move to the length point you want to cut, gradually rotate the handle on the cutter, make the blade squeeze the rotating pipe, and the pipe is squeezed and cut by the blade after 4 and 5 turns
